Blank – Golden Walnut Pre-finished Thermafoil Interior Door
A light wood grain interior door with a durable surface and a clean flat-panel profile. Its natural-looking texture adds warmth to contemporary residential, office, hotel, and dining spaces.
The Blank is a Golden Walnut wood grain Solid Core interior door designed to deliver a natural appearance with easy everyday maintenance. Its lacquer-free door leaf uses a PVC decorative film, MDF balance layers, a multilayer-board substrate, MDF filling, and PVC edge banding. The softly textured wood grain introduces warmth while the simple flat profile keeps the overall look modern and adaptable. It accommodates wall thicknesses from 4-3/4 in. to 7-1/4 in. Product testing includes at least 100,000 opening and closing cycles, surface scratch resistance, abrasion resistance, yellowing resistance, impact resistance, and structural stability. It also carries an E1 formaldehyde release level of no more than 0.124 mg/m³.
Assemble and adjust the door frame horizontally, fix the door frame, install the door leaf onto the door frame and fix the lnvisible hinge,
install the door frame line, and finally install the door lock.
Installation Instructions
Before installing wooden doors, professional installers must carefully familiarize themselves with the drawings, verify the position and size of the openings, embedded parts, opening direction, products, and hardware accessories to ensure they match the order requirements and on-site conditions.
In damp places such as kitchens, door frames are not allowed to directly touch the ground. It is necessary to leave gaps and
apply sealant to prevent product deformation due to moisture; Attention should be paid to preventing moisture at the lower opening of components such as door frames that require sawing.
1. Under normal circumstances , the door leaf should be kept closed frequently, and double doors should be plugged in to prevent collision and damage.
2. In special situations where there is a significant temperature or humidity difference between the two sides of the door leaf, it is necessary to keep the door leaf open to avoid deformation caused by uneven temperature or humidity on both sides.
3. When opening and closing the door leaf, excessive force or opening angle should not be applied.
4. Use wrung out damp cotton cloth for daily cleaning, avoid moisture, keep away from heat sources , rain, and direct sunlight.
5. It is strictly prohibited to come into contact with corrosive liquids such as acids and alkalis, and the use of adhesives on the surface of the product.
6. Strictly avoid striking or scratching the lacquered surface of the wooden door with hard objects.
7. Timely lubricate the hinges and pay attention to checking for looseness.
8. Do not hang heavy objects or step on the door.
9. Avoid direct sunlight exposure to prevent discoloration of the decorative surface.
Flat Door Anti Vertical and Performance
500N static load, residual deformation less than 3mm, normal opening and closing.
Anti Static Distortion Performance of Swing Doors
200N load, residual deformation less than 3mm, normal opening and closing.
Opening and Closing Force:
Flat door not exceeding 80N, sliding door not exceeding 100N.
Repeated Opening and Closing
Durability Performance
More than or equal to 100000 times.
Flat Door Resistant to Impact From
Soft and Heavy Objects
No deformation, no damage, no glass detachment, normal opening and closing.
Surface Scratch Resistance
The surface is subjected to a surface of not more than 0.5 N without a full circle of scratches on the surface of the specimen.